New fabrication method using additive manufacturing technologies for the pattern of pressed lithium disilicate onlay restorations

Authors

  • Marta Revilla-Leon Graduate Prosthodontics – University of Washington – Seattle – USA. Revilla Research Center RRC – Madrid – Spain. http://orcid.org/0000-0003-2854-1135
  • Marina Olea-Vielba Revilla Research Center RRC – Madrid – Spain.
  • Ana Esteso-Díaz Revilla Research Center RRC – Madrid – Spain.
  • Iñaki Martinez-Klemm Revilla Research Center RRC – Madrid – Spain. Director Dental Laboratory Odoteck – Madrid – Spain.
  • Jose Manuel Reuss Rodriguez-Vilaboa Revilla Research Center RRC – Madrid – Spain. Complutense University of Madrid – Madrid – Spain.
  • Mutlu Özcan Dental Materials Unit – Center for Dental and Oral Medicine – University of Zürich – Switzerland.

DOI:

https://doi.org/10.14295/bds.2017.v20i4.1364

Abstract

There are 7 categories for the additive manufacturing (AM) technologies and a wide variety of materials that can be used to build a computer aided designed (CAD) 3-Dimensional (3D) object. The present article reviews the main AM processes for polymers for dental applications: stereolithography (SLA), direct light processing (DLP), material jetting (MJ) and material extrusion (ME). The manufacturing process, accuracy and precision of these methods will be reviewed, as well as, their prosthodontic applications.

 

Keywords: 3D printing; Additive manufacturing technologies; Direct light processing; Fused deposition modelling; Material extrusion; Material jetting; Multijet printing; Prosthodontics; Stereolitography.

Author Biographies

Marta Revilla-Leon, Graduate Prosthodontics – University of Washington – Seattle – USA. Revilla Research Center RRC – Madrid – Spain.

Affiliate Faculty Graduate Prosthodontics, School of Dentistry, University of Washinton. Director and Researcher at Revilla Research Center.

Marina Olea-Vielba, Revilla Research Center RRC – Madrid – Spain.

Researcher at Revilla Research Center.

Ana Esteso-Díaz, Revilla Research Center RRC – Madrid – Spain.

Researcher at Revilla Research Center.

Iñaki Martinez-Klemm, Revilla Research Center RRC – Madrid – Spain. Director Dental Laboratory Odoteck – Madrid – Spain.

Odoteck Dental Laboratory

Jose Manuel Reuss Rodriguez-Vilaboa, Revilla Research Center RRC – Madrid – Spain. Complutense University of Madrid – Madrid – Spain.

Affiliate Faculty Graduate Prosthodontics, Complutense University of Madrid, Spain

Downloads

Published

2017-12-20

Issue

Section

Case Report / Clinical Technique Manuscript