An evaluation of the effect of different veneer materials on fracture resistance of zirconia core
DOI:
https://doi.org/10.14295/bds.2021.v24i3.2380Abstract
Objective: this in vitro study was done to evaluate the effect of packable P60 composite and Tetric N-Ceram composite veneer material on fracture strength of zirconia cores. Material and Methods: Twenty four zirconium cores (Vita, Germany) with 0.7 mm thickness were fabricated by CAD/CAM technology and then subjected to air abrasion with 50µm of Al2O3. Cores were randomly divided into three groups according to veneering material (group A: control group sandblasted with 50 µm Al2O3 veneered by IPS E-max Ceram porcelain, group C: sandblasted with 50 µm Al2O3, etching with hydrofluoric acid and veneered with P60 composite, group E: sandblasted with 50 µm Al2O3, etching with hydrofluoric acid and veneered with Tetric N-Ceram composite). All crowns were subjected to fracture strength test in the testing machine, with load application by steel ball indenter and 0.5 mm/min. cross head speed. Results: statistical analysis was carried out utilizing one-way ANOVA, LSD. The results of fracture strength value test showed the highest mean value was registered for group (A), and the lowest mean for group (E). One-way ANOVA test represented that, there was a statistically high significant different among all groups. LSD results showed a high significant difference increase in fracture resistance for Group A at p value (*P<0.001 High significant). Conclusions: Within the limitation of this study, sandblasting zirconia core with 50 µm Al2O3 and veneering with conventional ceramic produced restoration with acceptable fracture resistance value.
Keywords
Composite resin; Fracture resistance; Hydrofluoric acid; IPS Emax ceram; zirconium oxide.
References
References
Chevalier J, Gremillard L, Virkar AV, Clarke DR. The tetragonal?monoclinic transformation in zirconia: lessons learned and future trends. Journal of the American Ceramic Society. 2009; 92(9):1901-1920.
https://ceramics.onlinelibrary.wiley.com/doi/abs/10.1111/j.1551-2916.2009.03278.x
Guess PC, Zavanelli RA, Silva NR, Bonfante EA, Coelho PG, Thompson VP. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. International Journal of Prosthodontics. 2010; 23(5):434-442.
https://pubmed.ncbi.nlm.nih.gov/20859559/
Casson A, Jones JG, Youngson C, Wood D. The effect of luting media on the fracture resistance of a flame sprayed all-ceramic crown. Journal of dentistry. 2001; 29(8): 539-544.
DOI: 10.1016/s0300-5712(01)00040-9
Park JH, Park S, Lee K, Yun KD, Lim HP. Antagonist wear of three CAD/CAM anatomic contour zirconia ceramics. The Journal of prosthetic dentistry. 2014; 111(1): 20-29.
DOI: 10.1016/j.prosdent.2013.06.002
Dhawan P, Prakash H, Shah N. Clinical and scanning electron microscopic assessments of porcelain and ceromer resin veneers. Indian journal of dental research: official publication of Indian Society for Dental Research. 2003; 14(4):264-278.
https://pubmed.ncbi.nlm.nih.gov/15328996/
Hervas-Garcia A, Martines – Lozano M, Cabanes – Vila J. Composite resins. A review of the materials and clinical indications. Med Oral Patol Oral Cir Bucal. 2006; 11(2):215-220.
https://pubmed.ncbi.nlm.nih.gov/16505805/
Kobayashi K, Komine F, Blatz MB, Siato A, Koizumi H, Matsumura H. Influence of priming agents on the short-term bond strength of an indirect composite veneering material to zirconium dioxide ceramic. Quintessence International. 2009; 40(7):545-51.
https://pubmed.ncbi.nlm.nih.gov/19626228/
Hamza TA, Sherif RM. In vitro evaluation of marginal discrepancy of monolithic zirconia restorations fabricated with different CAD-CAM systems. The Journal of prosthetic dentistry. 2017; 117(6): 762-766.
DOI: 10.1016/j.prosdent.2016.09.011
Hussain, SA, Hamid MA. Assessment of marginal accuracy of CAD CAM Interim material by two different types of dental scanners. World Journal of Pharmaceutical Research. 2019;8(2): 1750-1761.
[ DOI : 10.20959/wjpr20192-14046 ]
Abdulkareem AM, Ibraheem AF. Comparison of the Marginal Fitness of the Ceramic Crowns Fabricated with Different CAD/CAM Systems: An in Vitro Study. Journal of Baghdad College of Dentistry. 2016; 28(4):28-33.
https://doi.org/10.12816/0033207
Alsadon O, Patrick D, Johnson A, Pollington S, Wood D. Fracture resistance of zirconia-composite veneered crowns in comparison with zirconia-porcelain crowns. Dental materials journal. 2017; 36(3):289-295.
DOI: 10.4012/dmj.2016-298
Gaeed SA, ALI A A-A. Failures of Porcelain Laminate Veneers Using Different Techniques of Bonding, A Comparative Study. Journal of Oral and Dental Research. 2017; 4(1):35-46.
https://www.iasj.net/iasj?func=fulltext&aId=125037
Peampring C, Aksornmuang J, SanohkN S. In vitro fracture resistance of composite-resin-veneered zirconia crowns. Journal of conservative dentistry: JCD. 2017; 20(4) 225-229.
DOI:10.4103/JCD.JCD_130_16
Guazzato M, Albakry M, Ringer SP, SWAIN MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dental materials. 2004; 20(5): 449-456.
DOI: 10.1016/j.dental.2003.05.002
Manicone PF, Iommetti PR, Raffaelli L. 2007. An overview of zirconia ceramics: basic properties and clinical applications. Journal of dentistry. 2007; 35(11):819-826.
DOI: 10.1016/j.jdent.2007.07.008
Gargari M, Gloria F, Cappello A, Ottria L. Strength of zirconia fixed partial dentures: review of the literature. ORAL & implantology. 2010; 3(4):15-24.
Ferracane JL. Resin composite-state of the art. Dental materials. 2011; 27(1): 29-38.
Özkurt Z, Kazazoglu E. Zirconia dental implants: a literature review. Journal of oral implantology. 2011; 37(3):367-376.
doi: 10.1563/AAID-JOI-D-09-00079.
Agustín-Panadero R, Román-Rodríguez JL, Ferreiroa A, Solá-Ruíz MF, Fons-Font A. Zirconia in fixed prosthesis. A literature review. Journal of clinical and experimental dentistry. 2014; 6(1):e66-e73.
https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3935908/
Casson A, Jones JG, Youngson C, Wood D. The effect of luting media on the fracture resistance of a flame sprayed all-ceramic crown. Journal of dentistry. 2001; 29(8):539-544.
DOI: 10.1016/s0300-5712(01)00040-9
Korkmaz FM, Bagis B, Turgut S, Ates SM, Ayaz EA. Effect of surface treatments on the bond strength of veneering ceramic to zirconia. Journal of applied biomaterials & functional materials. 2015;13(1):17-27.
doi.org/10.5301/jabfm.5000195
Su N, Yue L, Liao Y, Liu W, Zhang H, Li X, Wang H, Shen J. The effect of various sandblasting conditions on surface changes of dental zirconia and shear bond strength between zirconia core and indirect composite resin. The journal of advanced prosthodontics. 2015; 7(3):214-223.
DOI: 10.4047/jap.2015.7.3.214
He M, Zhang Z, Zheng D, Ding N, Liu Y. Effect of sandblasting on surface roughness of zirconia-based ceramics and shear bond strength of veneering porcelain. Dental materials journal. 2014; 33(6):778-785.
DOI: 10.4012/dmj.2014-002
Tarib NA, Anuar N, Ahmad M. Shear bond strength of veneering ceramic to coping materials with different pre-surface treatments. The journal of advanced prosthodontics. 2016; 8(5): 339-344.
DOI: 10.4047/jap.2016.8.5.339
3M ESPE Technical Product Profile FiltekTM P60 Universal Restoration. 3M ESPE. St. paul, MN, USA; 2016.
Ivoclar Vivadent, Universal Tetric Evo CeramR: Scientific Documentation. Schaan, Liechtenstein, 2016.
https://www.ivoclarvivadent.com/en/p/all/products/restorative-materials/composites/tetric-evoceram
Manhart J, Kunzelmann KH, Chen Y, Hickel R. Mechanical properties of new composite restorative materials. Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and The Korean Society for Biomaterials. 2000; 53(4):353-361.
https://doi.org/10.1002/1097-4636(2000)53:4<353::AID-JBM9>3.0.CO;2-B
Hamouda IM, Shehata SH. Fracture resistance of posterior teeth restored with modern restorative materials. Journal of biomedical research. 2011; 25(6):418-424.
doi: 10.1016/S1674-8301(11)60055-9
