Shear bond strength of resin composite to enamel treated with Er:Y AG laser and phosphoric acid
DOI:
https://doi.org/10.14295/bds.2007.v10i4.266Resumen
The purpose of this work was to evaluate the shear bond strength of resin composite to enamel treated with Er:YAG laser. It was used 33 human third molars. After the dental crowns cutting, the mesial and distal surfaces were embedded perpendicularly to the PVC cylinders long axis. Enamel was ground and the samples were randomly divided into 6 groups: G1- phosphoric acid (control), G2- Er:YAG laser (60mJ/10Hz), G3- Er:YAG (100mJ/10Hz), G4- Er:YAG (60mJ/10Hz + acid), G5- Er:YAG (100mJ/ 10Hz + acid), G6- Er:YAG (80mJ/2Hz). In all groups, Single Bond was used and resin composite cylinders (Z100) were prepared. The samples were stored in distilled water at 37oC for 24 hours and submitted to shearing test. G1 presented bond strength values significantly higher than G2, G3 and G6. The groups irradiated only with Er:YAG laser, in different intensities and frequencies, were equivalent as for the bond strength values. The groups treated with laser + acid presented strength values statistically equal to those of the control group. The enamel treatment with phosphoric acid, or its association with laser, is important to obtain good bond. The use of Er: YAG laser alone is not recommended, considering the conditions tested in this study.Descargas
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Brazilian Dental Science uses the Creative Commons (CC-BY 4.0) license, thus preserving the integrity of articles in an open access environment. The journal allows the author to retain publishing rights without restrictions.
=================
COPYRIGHT TRANSFER AND RESPONSIBILITY STATEMENT
(PDF)
For all articles published in the BDS journal, copyright is retained by the authors. Articles are licensed under an open-access Creative Commons CC BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted, provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit. All metadata associated with published articles is released under the Creative Commons CC0 Universal Public Domain Dedication.
Before the submission, authors must obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) that does not fall into the public domain or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).
The authors hereby attest that the study is original and does not present manipulated data, fraud, or plagiarism. All names listed made a significant scientific contribution to the study, are aware of the presented data, and agree with the final version of the manuscript. They assume complete responsibility for the ethical aspects of the study.
This text must be printed and signed by all authors. The scanned version should be submitted as supplemental file during the submission process.
Plaudit
