The dental alloys determine the choice of composite resins to be used.

Autores

  • Izabela Cristina Maurício Moris Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.
  • Matheus Sakuma Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.
  • Adriana Cláudia Lapria Faria Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.
  • Ana Paula Macedo Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.
  • Ricardo Faria Ribeiro Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.
  • Renata Cristina Silveira Rodrigues Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

DOI:

https://doi.org/10.14295/bds.2017.v20i1.1329

Resumo

Objective: The aim of the present study was to evaluate wear resistance of two composites resins against alternative alloys. Material and Methods: Fifteen stylus tips samples of composite resin were obtained for each resin Z250 and charisma (CHA). Samples were divided into three groups according to the disk of alloy to be used as antagonist: Nickel-Chromium (Ni-Cr), Cobalt- Chromium (Co-Cr) and commercially pure titanium (cp Ti). Wear tests were performed at a speed of 265 cycles/min and distance of 10mm, in a total of 40,000 cycles. Before and after wear tests, samples were weighed and had their profile designed in an optical comparator to evaluate weight and height loss, respectively. Results: For weight and height loss, wear of Z250 was lower than CHA for Co-Cr antagonist, but greater for cp Ti. CHA presents a more regular surface without cracks and similar aspect for all antagonists. Z250 showed some cracks, mainly against cp Ti and Ni-Cr. Conclusion: Within the results of the present study, it was concluded that CHA is suitable against cp Ti, and Z250 for association with Co-Cr alloy while any composite resin can be used against Ni-Cr.

Keywords

Composite resins; Dental alloys; Dental restoration wear.

Downloads

Não há dados estatísticos.

Biografia do Autor

Izabela Cristina Maurício Moris, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Matheus Sakuma, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Adriana Cláudia Lapria Faria, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Ana Paula Macedo, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Ricardo Faria Ribeiro, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Renata Cristina Silveira Rodrigues, Department of Dental Materials and Prosthodontics – Dental School of Ribeirão Preto – University of São Paulo – Ribeirão Preto – SP – Brazil.

Department of Dental Materials and Prosthodontics

Downloads

Publicado

2017-03-29

Como Citar

1.
Moris ICM, Sakuma M, Faria ACL, Macedo AP, Ribeiro RF, Rodrigues RCS. The dental alloys determine the choice of composite resins to be used. BDS [Internet]. 29º de março de 2017 [citado 11º de setembro de 2025];20(1):92-8. Disponível em: https://bds.ict.unesp.br/index.php/cob/article/view/1329

Edição

v. 20 n. 1 (2017): Jan. - Mar. / 2017 - Published February 2017

Seção

Artigos de Pesquisa Clínica ou Laboratorial

Licença

TRANSFERÊNCIA DE DIREITOS AUTORAIS E DECLARAÇÃO DE RESPONSABILIDADE



Toda a propriedade de direitos autorais do artigo "____________________________________________________________________" é transferido do autor(es) para a CIÊNCIA ODONTOLÓGICA BRASILEIRA, no caso do trabalho ser publicado. O artigo não foi publicado em outro lugar e não foi submetido simultaneamente para publicação em outra revista.

Vimos por meio deste, atestar que trabalho é original e não apresenta dados manipulados, fraude ou plágio. Fizemos contribuição científica significativa para o estudo e estamos cientes dos dados apresentados e de acordo com a versão final do artigo. Assumimos total responsabilidade pelos aspectos éticos do estudo.



Este texto deve ser impresso e assinado por todos os autores. A versão digitalizada deverá ser apresentada como arquivo suplementar durante o processo de submissão.


Crossref
Scopus
Google Scholar
Europe PMC

Artigos mais lidos pelo mesmo(s) autor(es)