Influence of titanium nanotubular surfaces, produced by anodization, on the behavior of osteogenic cells: in vitro evaluation

Autores

  • Juliani Caroline Ribeiro de Araújo Universidade Estadual Paulista “Júlio de Mesquita Filho”, Institute of Science and Technology, Department of Bioscience and Oral Diagnosis. São José dos Campos, SP, Brazil. https://orcid.org/0000-0001-6926-1581
  • Lidiane Lopes do Espirito Santo Universidade Estadual Paulista “Júlio de Mesquita Filho”, Institute of Science and Technology, Department of Bioscience and Oral Diagnosis. São José dos Campos, SP, Brazil. https://orcid.org/0000-0001-7865-3843
  • Sandra Giacomin Schneider Universidade de São Paulo, Escola de Engenharia de Lorena, Department of Engineering Materials. Lorena, SP, Brazil. https://orcid.org/0000-0002-9379-8351
  • Gabriela de Fátima Santana- Melo Universidade Estadual Paulista “Júlio de Mesquita Filho”, Institute of Science and Technology, Department of Bioscience and Oral Diagnosis. São José dos Campos, SP, Brazil. https://orcid.org/0000-0002-7331-8517
  • Isabel Chaves Silva Carvalho Universidade do Vale do Paraíba, Institute of Research and Development. São José dos Campos, SP, Brazil. https://orcid.org/0000-0001-6466-9836
  • Denise Richter Franzini Universidade de São Paulo, Escola de Engenharia de Lorena. Lorena SP, Brazil. https://orcid.org/0000-0002-0333-1492
  • Marianne Spalding Universidade Estadual Paulista “Júlio de Mesquita Filho”, Institute of Science and Technology, Department of Bioscience and Oral Diagnosis. São José dos Campos, SP, Brazil. https://orcid.org/0000-0003-3667-2434
  • Luana Marotta Reis de Vasconcellos Universidade Estadual Paulista “Júlio de Mesquita Filho”, Institute of Science and Technology, Department of Bioscience and Oral Diagnosis. São José dos Campos, SP, Brazil. https://orcid.org/0000-0003-4344-0578

DOI:

https://doi.org/10.4322/bds.2022.e2528

Resumo

Objective: The objective of this study was to evaluate in vitro the influence of the anodized surface of Ti35Nb7Zr
alloy on the behavior of osteogenic cells, for future application in biomedical implants. Material and Methods:
For the development of this research, samples of commercially pure titanium (TiCp) and samples of Ti35Nb7Zr
alloy were anodized, both were characterized by scanning electron microscopy (SEM) and were plated afterwards
with human osteoblast-like cells (MG63 line) (2 x 104). Cell adhesion, cytotoxicity test, formation of mineralization
nodules and a comet assay were also performed in different periods. The bottom of the plate was used as a
control, without a sample. Results: SEM analysis showed that the topography of both samples presented surfaces
covered by nanotubes. Cellular morphology exhibited spreading in both samples proposing an intimate cellmaterial
liaison. After 3 days, the Ti35Nb7Zr group exhibited greater cell viability than the TiCp group (p<0.01).
Regarding calcium content, there was no statistical difference between the anodized groups, but there was a
difference between the experimental groups and the control group (p<0.01). In the comet assay, the percentage
of DNA in the comet tail did not exhibit any significant difference (p>0.05) among the groups in the evaluated
periods. Conclusion: It was concluded that this process of anodization was efficient to form nanotubes, as well
as promote a positive influence on the behavior of osteogenic cells without promoting cell damage.
KEYWORDS
Nanotopography; Osteoblast; Titanium alloy; Titanium implants.

Downloads

Não há dados estatísticos.

Downloads

Publicado

2022-01-07 — Atualizado em 2022-03-29

Versões

Como Citar

1.
Ribeiro de Araújo JC, Espirito Santo LL do, Schneider SG, Santana- Melo G de F, Carvalho ICS, Franzini DR, Spalding M, de Vasconcellos LMR. Influence of titanium nanotubular surfaces, produced by anodization, on the behavior of osteogenic cells: in vitro evaluation. BDS [Internet]. 29º de março de 2022 [citado 12º de setembro de 2025];25(1). Disponível em: https://bds.ict.unesp.br/index.php/cob/article/view/2528

Edição

v. 25 n. 1 (2022): Jan - Mar / 2022 Published Jan 2022

Seção

Artigos de Pesquisa Clínica ou Laboratorial

Licença

TRANSFERÊNCIA DE DIREITOS AUTORAIS E DECLARAÇÃO DE RESPONSABILIDADE



Toda a propriedade de direitos autorais do artigo "____________________________________________________________________" é transferido do autor(es) para a CIÊNCIA ODONTOLÓGICA BRASILEIRA, no caso do trabalho ser publicado. O artigo não foi publicado em outro lugar e não foi submetido simultaneamente para publicação em outra revista.

Vimos por meio deste, atestar que trabalho é original e não apresenta dados manipulados, fraude ou plágio. Fizemos contribuição científica significativa para o estudo e estamos cientes dos dados apresentados e de acordo com a versão final do artigo. Assumimos total responsabilidade pelos aspectos éticos do estudo.



Este texto deve ser impresso e assinado por todos os autores. A versão digitalizada deverá ser apresentada como arquivo suplementar durante o processo de submissão.


Crossref
Scopus
Google Scholar
Europe PMC

Artigos mais lidos pelo mesmo(s) autor(es)