Evaluation of the marginal adaptation of ceramic copings in function of the
DOI:
https://doi.org/10.14295/bds.2003.v6i4.537Resumen
This study evaluates the marginal adaptation of ceramic copings (In-Ceram, Vita) front of two finish lines andinternal surface treatment (Rocatec, ESPE). For this, two master steel dies were milled with all-ceramic crowns
preparation, one with a round shoulder (RS) margin design, and the other with a deep chamfer (DC). Twenty
copings were made, and the marginal discrepancy was evaluated in measuring microscope, obtaining an initial
measure. Each group was divided in two others, which received two kinds of silica sandblasting: (1) in all inner
crown surface - DCt and RSt - and (2) in the inner crown surface, but preserving the cervical edge - DCa and
RSa. The discrepancies were measured again and the data submitted to the statistical analysis. Marginal discrepancy
values of 42,37±18,78μm were observed for group DC and 33,35±20,08μm for group RS in the initial
measures, without significant statistical differences among them. The initial and final gap values were compared
to each one of the experimental groups, being observed statistical differences in DCa and DCt. Statistical differences
was not observed among the post-sandblasting values. It was concluded that both cervical endings present
similar marginal adaptations between them when not submitted to any treatment type. When accomplished
the surface treatment, negative influence was observed in the marginal adaptation of some groups, if compared
the initial and final values, in spite of differences among the last ones were not been observed.
Descargas
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Brazilian Dental Science uses the Creative Commons (CC-BY 4.0) license, thus preserving the integrity of articles in an open access environment. The journal allows the author to retain publishing rights without restrictions.
=================
COPYRIGHT TRANSFER AND RESPONSIBILITY STATEMENT
(PDF)
For all articles published in the BDS journal, copyright is retained by the authors. Articles are licensed under an open-access Creative Commons CC BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted, provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit. All metadata associated with published articles is released under the Creative Commons CC0 Universal Public Domain Dedication.
Before the submission, authors must obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) that does not fall into the public domain or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).
The authors hereby attest that the study is original and does not present manipulated data, fraud, or plagiarism. All names listed made a significant scientific contribution to the study, are aware of the presented data, and agree with the final version of the manuscript. They assume complete responsibility for the ethical aspects of the study.
This text must be printed and signed by all authors. The scanned version should be submitted as supplemental file during the submission process.
