An investigation of the optical density of composite resin using digital radiography
DOI:
https://doi.org/10.14295/bds.2004.v7i2.482Resumo
The aim of this study was to verify the radiopacity of four microhibridas composed resin: Filmagic – Vigodent,Herculite – Kerr, TPH – Dentsply, W3D – Wilcos in the color A3 and compares them with the dental enamelusing direct digital radiography system. Acrylic Plates of 20mm for 30mm had been used, in the thickness 1mm,2mm and 3mm, contend four cavities which had been filled with resins composed, it was used three human teethin the same thickness, 36 samples was confected. The specimens were stored at 37 ± 1ºC and immersed indistillate water. The specimens and the human tooth had been radiographed with the Dentsply – Gendex 765DC®from a distance of 40cm and to capture the images, a charge-coupled-device system for digital radiography(Visualix® Dentsply-Gendex) and a software DIGORA® for Windows®. The results submitted to statistical analysis(Tukey´s test a variance analyze ANOVA) showed that there was statistical difference among the opticaldensity of the dental enamel and composite resins, being that the composite resin TPH presented 220,76 (1mm),239,32 (2mm) e 244,09 (3mm), followed by Herculite 192,87 (1mm), 211,67 (2mm) e 225,16 (3mm); W3D 179,90(1mm), 205,07 (2mm) e 220,95 (3mm) e Fill Magic 174,59 (1mm), 190,90 (2mm) e 212,01 (3mm) e enamel113,66 (1mm), 119,97 (2mm) e 143,13 (3mm). The composite resins in the thicknesses studied had presentedoptical density values higher than enamel so they had been satisfied to be used in dental restorations.Downloads
Downloads
Publicado
Como Citar
Edição
Seção
Licença
TRANSFERÊNCIA DE DIREITOS AUTORAIS E DECLARAÇÃO DE RESPONSABILIDADE
Toda a propriedade de direitos autorais do artigo "____________________________________________________________________" é transferido do autor(es) para a CIÊNCIA ODONTOLÓGICA BRASILEIRA, no caso do trabalho ser publicado. O artigo não foi publicado em outro lugar e não foi submetido simultaneamente para publicação em outra revista.
Vimos por meio deste, atestar que trabalho é original e não apresenta dados manipulados, fraude ou plágio. Fizemos contribuição científica significativa para o estudo e estamos cientes dos dados apresentados e de acordo com a versão final do artigo. Assumimos total responsabilidade pelos aspectos éticos do estudo.
Este texto deve ser impresso e assinado por todos os autores. A versão digitalizada deverá ser apresentada como arquivo suplementar durante o processo de submissão.