Posterior rehabilitation using 3D-printed dental implants and synthetic regenerative membranes

Autores/as

  • Guilherme da Rocha Scalzer Universidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, Departamento de Biomateriais Dentários, Materiais Dentários, e Prótese Dentária, São José dos Campos, São Paulo, Brazil. https://orcid.org/0000-0002-4310-0082
  • Jefferson David Melo de Matos Universidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, Departamento de Biomateriais Dentários, Materiais Dentários, e Prótese Dentária, São José dos Campos, São Paulo, Brazil. https://orcid.org/0000-0003-4507-0785
  • Dayane Oliveira University of Florida, College of Dentistry, Center for Dental Biomaterials, Department of Restorative Dental Sciences, Gainesville, FL, United States. https://orcid.org/0000-0003-1420-5720
  • Pedro Henrique Condé Oliveira Prado Universidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, Departamento de Biomateriais Dentários, Materiais Dentários, e Prótese Dentária, São José dos Campos, São Paulo, Brazil. https://orcid.org/0000-0003-1833-559X
  • Mateus Garcia Rocha University of Florida, College of Dentistry, Center for Dental Biomaterials, Department of Restorative Dental Sciences, Gainesville, FL, United States. https://orcid.org/0000-0001-5658-5640
  • Mário Alexandre Coelho Sinhoreti Faculdade de Odontologia de Piracicaba (FOP-UNICAMP), Departamento de Odontologia Restauradora, Divisão de Materiais Dentários, Piracicaba, São Paulo, Brazil. https://orcid.org/0000-0002-1932-2902
  • Marco Antonio Bottino Universidade Estadual Paulista (Unesp), Instituto de Ciência e Tecnologia, Departamento de Biomateriais Dentários, Materiais Dentários, e Prótese Dentária, São José dos Campos, São Paulo, Brazil. https://orcid.org/0000-0003-0077-3161
  • Nathália de Carvalho Ramos Universidade de Taubaté, Departamento de Odontologia, Taubaté, São Paulo, Brazil. https://orcid.org/0000-0002-0977-5350

DOI:

https://doi.org/10.4322/bds.2022.e3572

Resumen

Aim: To describe through a clinical case report the surgical sequence of rehabilitation with 3D-printed implants
associated with maxillary sinus floor lift with synthetic regenerative materials, including biphasic bioceramic.
Case Report: Patient had an agenesis of the upper left premolars (#12 and #13), a vertical bone deficiency
caused by maxillary sinus’ pneumatization, and a horizontal alveolar resorption around the missing teeth area.
During the surgical procedures, incisions, detachment, and osteotomy were performed in the lateral region of
the maxillary sinus. The sinus membrane was detached and lifted 10 mm. Then, a thick poly(dioxanone)-based
synthetic resorbable membrane (Plenum) was inserted and adapted inside the sinus to protect the sinus membrane.
After the osteotomies with sub-instrumentation, 3D-printed implants (Plenum) were installed in the #12 area
(3.5mm x 11.5 mm; 30N) and #13 area (4.0mm x 10mm; 20N). The maxillary sinus was entirely filled with a
biphasic bioceramic,HA/B-TCP (70:30) 500-1000 um (Plenum) and covered by the same synthetic resorbable
membrane. Connective tissue graft from the palatal area was positioned internally to the flap and stabilized with
sutures to improve the vestibular tissue architecture. The entire surgical wound was sutured, and the tissues
stabilized. No complications occurred in the postoperative period. Conclusion: The use of synthetic regenerative
memberane and 3D-printed implants seems to be a promising option in areas of deficient bone remnants.

KEYWORDS
Dental Implants; 3D Printing; Maxillary Sinus; Sinus Floor Augmentations; Tissue Grafting.

Descargas

Los datos de descargas todavía no están disponibles.

Descargas

Publicado

2022-12-20

Cómo citar

1.
Scalzer G da R, Matos JDM de, Oliveira D, Prado PHCO, Rocha MG, Sinhoreti MAC, Bottino MA, Ramos N de C. Posterior rehabilitation using 3D-printed dental implants and synthetic regenerative membranes. BDS [Internet]. 20 de diciembre de 2022 [citado 10 de septiembre de 2025];25(4). Disponible en: https://bds.ict.unesp.br/index.php/cob/article/view/3572

Número

Vol. 25 Núm. 4 (2022): Oct - Dec / 2022 - Published Sep 2022

Sección

Case Report or Clinical Technique

Licencia

Brazilian Dental Science uses the Creative Commons (CC-BY 4.0) license, thus preserving the integrity of articles in an open access environment. The journal allows the author to retain publishing rights without restrictions.

=================

COPYRIGHT TRANSFER AND RESPONSIBILITY STATEMENT
 (PDF)

For all articles published in the BDS journal, copyright is retained by the authors. Articles are licensed under an open-access Creative Commons CC BY 4.0 license, meaning that anyone may download and read the paper for free. In addition, the article may be reused and quoted, provided that the original published version is cited. These conditions allow for maximum use and exposure of the work while ensuring that the authors receive proper credit. All metadata associated with published articles is released under the Creative Commons CC0 Universal Public Domain Dedication.

Before the submission, authors must obtain permission to reproduce any published material (figures, schemes, tables, or any extract of a text) that does not fall into the public domain or for which they do not hold the copyright. Permission should be requested by the authors from the copyright holder (usually the Publisher, please refer to the imprint of the individual publications to identify the copyright holder).

The authors hereby attest that the study is original and does not present manipulated data, fraud, or plagiarism. All names listed made a significant scientific contribution to the study, are aware of the presented data, and agree with the final version of the manuscript. They assume complete responsibility for the ethical aspects of the study.

This text must be printed and signed by all authors. The scanned version should be submitted as supplemental file during the submission process.

Artículos más leídos del mismo autor/a

1 2 3 4 > >>